Start your job search

CBA130 Aircrew Survival Equipment Mechanic T45 PENSACOLA FL

Position Overview:

· Pursuant to specific provisions, set forth in the CBA, at the discretion of management, may be requested to perform the duties of personnel in higher positions. Any employee designated, as an Aircraft Mechanic (ALSS) Lead shall perform the work in the assigned job classification. He/she will be responsible to his Supervisor for the satisfactory completion of all job assignments. The ALSS Lead shall be required to direct the work of other employees in the job classification.

· Perform all duties of his job classification.

· Assign and direct the productive efforts of assigned employees. Make recommendations for assignment of employees and work load within the job classification.

· Advise Supervisory Personnel of the status of work in progress and coordinate with other work centers as required to accomplish tasks.

· Instructs assigned employees on proper methods and procedures as required.

· Comply with Hazardous Waste Program. When assigned, act as Hazardous Waste Coordinator.

· Responsible for enforcement of the Tool Control Program.

· Assist in the Training Program as required for employees in the job classification.

· Ensure required quality control inspections are complied with.

· Maintain appropriate records of all work accomplished.

· Assist when directed to ensure safety, security and preservation of Government owned and Company owned equipment.

· Perform other reasonably related incidental duties when directed within the job classification.

· Must be customer oriented.

Job Responsibilities:

· Inspect, test, repair, repack, and/or manufacture (ALSS) aircraft and related aircrew survival, aviators personal equipment, support equipment, oxygen components and accessories in accordance with applicable Maintenance Instruction Manuals (MIMs), Illustrated Parts Breakdowns (IPBs), Technical Directives (TDs), Maintenance Requirement Cards (MCLs), Navy Instructions, manufacturers’ manuals, company instructions and other approved data.

· Coordinate with supervision and Quality Assurance to resolve questions concerning serviceability and/or repair procedures.

· Assist with ordering parts, tools, materials and equipment as required.

· May be required to perform receiving, in-process and final inspections.

· Perform maintenance installation and repair on Navy aircraft Aircrew Common Ejection Seats Onboard Oxygen Generalizing Systems and environmental control systems.

· Transport, install and remove Cartridge Activated Devices (CADs) and propulsion-activated devices.

· Document work accomplished on Maintenance Action Forms (MAF) on GOLD/WECMS System.

· Maintain cleanliness of the work center and around your assigned work area.

· Responsible for adhering to all applicable Foreign Object Damage (FOD) prevention rules and regulations including participation in “FOD walk down” when directed.

· Required to handle hazardous materials in performance of assigned tasks.

· Responsible for adhering to the Company Tool Control Program.

· Comply with established general and industrial safety rules and regulations as applicable to the contract, facilities and job assignment.

· Perform simple computer input and extraction functions.

· Perform corrosion control cleaning, prevention, and treatment as required.

· Must possess personal hand tools required to perform work in his assigned job classification.

· Perform preventative maintenance on assigned shop and support equipment.

· Train aircrew in proper use of safety, water, and survival equipment.

· Comply with established hazardous waste program and local, state, and federal Environmental Protection Agency Regulations.

· Uses publications and charts to order, issue, receive, store, inventory, record, install, inspect, and make minor repairs to personal aviator flight clothing and survival equipment. All work is closely inspected and certified.

· Have capability to operate, adjust, clean, and lube a sewing machine, sew heavy and/or light material and vinyl by machine or manually as directed by special instruction for removal, installation, and/or minor repair of flight clothing.

· Coordinate work of assigned workers. Provide instruction and OJT to less skilled workers.

· May be required to perform off-site services on assigned detachments.

· Assist when directed to ensure safety, security and preservation of Government owned and Company owned equipment and property.

· May be required to assist other technicians, specialists, workers and mechanics in the performance of their duties during periods of personal or sick leave, vacation, breaks, reserve duty or during increased workload periods.

· May be required to wear a respirator while performing assigned duties.

· Perform duties of Aviator’s Breathing Oxygen (ABO) Analyst when authorized and designated.

· May be required to perform duties of Chemical Waste Custodian or Accumulation Point Coordinator when authorized and designated.

· Perform other reasonably related incidental duties when directed.

· May be required to perform off-site service on assigned detachments.

Qualifications

Basic Qualifications:

· In the past five (5) years, must have a minimum of four (4) years experience in Organizational and/or Intermediate level aviation life support equipment maintenance.

· Must have Parachute Rigger “A” school (CANTRAC Cor equivalent. For Oxygen equipment must have Parachute Rigger “B” school and/or Parachute Rigger “C” school (CANTRAC C-602-204) or equivalent. An Aviators Breathing Oxygen (ABO) operator/analyst shall be a graduate of an approved ABO school.

· Must have a thorough working knowledge of applicable airframes, aircrew survival equipment, oxygen components, and related support equipment inspection, troubleshooting, repair, modification, and maintenance procedures.

· Familiarization with OPNAVINST 4790.2 Series and other applicable Maintenance Instruction Manuals (MIMs), Illustrated Parts Breakdowns (IPBs), Technical Directives (TDs), manufacturers’ manuals and Company instructions.

· Must become qualified and certified in explosives handling personnel qualification and certification program in accordance with CNATRAINST 8023.1D within 30 days of date of hire or assignment to position.

· Maintain knowledge of Material Safety Data Sheet and applicable safety precautions.

· Must have a valid state operator’s license and be able to pass the Government/company licensing/qualification requirements.

· Must be able to read, speak, write legibly and understand the English language.

· Must be able to obtain the level of security clearance required by the Government.

Physical Demands and Environmental Conditions

· This classification activity is usually accomplished in a hangar/shop/flight line environment and as such requires the scope of physical movements and postures normally associated with these activities. May be required to lift objects whose weight normally will not exceed 50 pounds. Special vision abilities required to perform this job are close vision, peripheral vision, depth perception and the ability to adjust and focus.

· The diversity of work conditions may range from an environment where there is little or no physical discomfort, to an environment where inclement weather may subject individual to severe changes of temperature, wind, rain, etc. May be required to work in areas where high noise hazards prevail. May be exposed to fumes or airborne particles. May be exposed to electrical shock hazards.

LICENSING, CERTIFICATION REQUIREMENTS

* Formal or Specialized Training/Equivalent

* Hazardous Waste Communication Training

* FOD and TCP Awareness Trained

* Security Clearance Awareness Trained

* OPNAV INST 4790.2 Program Awareness

* ISOProgram Awareness

* Government On Line Data (GOLD) System Trained

* Valid State Driver’s License

* ESD Trained

* Collateral Duty Inspector (may be required)

* Egress System Checkout

* Support Equipment Operator’s License

* Plane Captain Certified #

* Non-Nuclear Ordnance Certified

* Aircraft Brake Rider Certified

* Aircraft Towing Certified

* Operational Risk Management (ORM) Training

* Fuel Surveillance Trained#

AA/EEO:

L-3 Vertex Aerospace is an equal opportunity employer. We encourage minorities, women, veterans and disabled individuals to apply. We maintain a drug-free Tobacco-free work place and perform pre-employment substance abuse testing.

US Security Clearance Required: Secret

Schedule
: Full-time

Shift
: Day - 1st

Travel
: Yes, 10 % of the Time

Organization
: Sector - Logistics Solutions-21000028

Job Level
: Individual Contributor

Job Posting
: May 26, 2017, 8:18:09 PM

Job
: Maintenance

I would like to apply for the post of CBA130 Aircrew Survival Equipment Mechanic T45 PENSACOLA FL bases at your esteemed organisation. I have attached my CV.

CV:

I agree to Terms and conditions* and Privacy Policy* and Site Usage Policy*

I don‘t want to receive regular notifications (in a form of newsletters) on new/featured Job Listings sent to my e-mail.